Puppet Master

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm

Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.

Filaments Used:

PLA BambuLab Matte Charcoal Transmission Distance: 0.8

PLA BambuLab Matte Dark Blue Transmission Distance: 5

PLA BambuLab Matte Marine Blue Transmission Distance: 9

PLA BambuLab Basic Jade White Transmission Distance: 3

Swap Instructions:

Start with Charcoal

At layer #3 (0.72mm) swap to Dark Blue

At layer #5 (1.12mm) swap to Marine Blue

At layer #9 (1.92mm) swap to Jade White for the rest.

Happy printing, and share your make!