M5Stamp C3 - ESP32 - HSW Mount

a little box to mount a M5Stamp C3 ESP32 development board to the HSW
2
8
0
181
updated March 1, 2024

Description

PDF

This is a rather simple little box, which allows you to put an m5stamp c3 esp32 on a Honeycomb Storage Wall and thread the cables through the insert.

I've made this with the specific project of a wled-controller for some leds that I want to put on the AMS Riser on my Bambulab X1C, but at least to me, it's useful for other projects too.

Note: to be able to thread cables through the insert part, you need to raise the m5stamp a bit higher. My original design had a standoff build-in, but I removed it in favor of being able to print without support - now I just screw a m2 nut in its place

the shell is made so it can be screwed on the base, or the base can be screwed on the shell - the latter looks nicer, the first one allows you to take the shell off without unmounting the base.

Tags



Model origin

The author marked this model as their own original creation.

License