Small Junction box (45*80*50) with two inputs and flexible gaskets / seals

New small junction box (only 45 by 80 by 50 mm)  with 2 inputs.

This junction box (for antenna and speaker cables)  features two inputs and can be securely attached to a surface using up to four screws. 

Seals for both cable entries can be provided with printed seals. 

A printable gasket is inserted between the cover and the housing (base). All seals were 3D printed in TPU and are flexible (red parts). 

The housing and cover were printed in PETG. The cover is fastened with 2 screws (4 mm). 

The print was done without support material. The models were created using Fusion 360. 

Please observe the relevant regulations in your country. Illustrative model (not for power cables). Use at your own risk

Remarks:

I have also designed bigger junction boxes with two to four openings. Please have a look under “Bruno Germany”.