Fillet / Round Measuring add on for Vernier Calipers

Have you ever had to guess the radius (or diameter) of a curved object? 

This tool helps you measure a numeric answer to that question! 

Radius = Caliper Reading X 2.414

How to use:

1. Insert the base of your caliper in the slot of the tool 
2. Hold the tool up against the “outside” of the curve
3. Extend the caliper until the depth gauge just touches the curve
4. Take the reading from the caliper and multiply by 2.414

Does not need supports - turn bridging ON

0.2mm layer height works fine. Print does not benefit from smaller layers