Spoolrack

This model requires a larger printer or some cutting and gluing. I have printed the “bolts” upright without issue but depends on your bed adhesion. The “arms” will technically fit on a standard Ender 3 size bed. But I had problems with adhesion and had to repair the model as I didnt want to waste filament. Recommend at least 30 percent infill and 3 perimeters but depends on your material and needs I guess.

For completion screw one “bolt” all the way in the Holder1 file (technically it does not matter but for the best fit, this is how I designed it) and then screw on the Holder2 at the end all the way till its flush with the end. The second bolt should be screwed in on both sides at the same time so everything fits nice and tight.