Raspberry Pi FLIRC Stack with 2 HDD and USB hub

Raspberry Pi Stack for FLIRC case, with cheap USB 3.0 Hub and two HDD disk with external case.

I've used cheap Chinese cases for HDD from Alibaba.

FLIRC case is for better cooling of Raspi,

Caution: If you plan on using the same usb hub as me you can have problem with booting raspi if you are gonna use Ubuntu Server as operating system, in other cases it will be fine. As a temporary solution, I just unplug power and turn on disks right after boot of raspi.

Some printing settings that I can recommend are as follows:

• 20% infill
• support (tree is the best one, I think)
• for better bed adhesion, it is recommended to use brim,

Version with OBJ file is available here (for 1$): https://cults3d.com/en/3d-model/various/raspberry-pi-flirc-stack-with-2-hdd-and-usb-hub