MK3S Heatbed 90 Deg Ultra Short Cable Cover Clamp

This cable cover allows the MK3 series printers fit into a 500mm deep cupboard or enclosure after relocation of the LCD assembly.

You will need to bend the cable terminals with a pair of pliers so they are angled at 90 deg as per the picture. They are pretty durable and this is needed so the bolt hole is not obstructed and there is no interference with the LED or resistor that are surface mounted to the heatbed.

I cut off and re-terminated one of the terminals so there was no excess cable when re-orientated to the right.

You will need Qty 3, M3x10mm machine screws and Qty 3 M3 nuts to complete this modification.

This has been modified from a previous version I did for the MK2 years ago.

Please verify that all print head cables clear the bracket before first print.