Barrel Tap For Simple Twist Open Barrel
This is a slight modification to the original tap beveling the edge to be able to use nut to attach to barrel.
7
29
0
195
updated February 25, 2024
Description
PDFThis remix allows adding a tap to the Simple Twist Open Barrel. When printing the nut I used a .2mm xy hole compensation in slicer to give required clearances for the nut to screw on.
Model origin
The author remixed this model.
Differences of the remix compared to the original
Beveled the end of the tap that inserts into hole allowing the use of the additional nut to attach to the lid of the Simple Twist Open Barrel.
