Buffalo Sabres Logo

Buffalo Sabres logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more logos.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Pro Blue Transmission Distance: 1
PLA PolyLite Pro Yellow Transmission Distance: 11
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Blue
At layer #10 (0.88mm) swap to Yellow
At layer #20 (1.68mm) swap to White for the rest.