Seatle Kraken logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyTerra Pastel Ice Transmission Distance: 1.5
PLA PolyLite Pro Light Blue Transmission Distance: 1
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Wine Red
At layer #16 (1.36mm) swap to Pastel Ice
At layer #19 (1.6mm) swap to Light Blue for the rest.
The author marked this model as their own original creation.