Minnesota Wild Logo

Minnesota Wild logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more logos.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA Protopasta Cloverleaf Metallic Green Transmission Distance: 5
PLA PolyLite Pro Metallic Red Transmission Distance: 0.5
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Cloverleaf Metallic Green
At layer #11 (0.96mm) swap to Metallic Red
At layer #16 (1.36mm) swap to Yellow
At layer #26 (2.16mm) swap to White for the rest.