Siberian Snow Tiger made with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA Hatchbox White Transmission Distance: 10
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA crealty blue Transmission Distance: 2.6
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to White
At layer #19 (1.6mm) swap to Black
At layer #25 (2.08mm) swap to blue for the rest.
The author marked this model as their own original creation.