Raspberry Pi 5 case incl. slim and M.2 HAT+ version

Case for a Raspberry Pi 5

### Update 2025-03-25 ###

• The power switch is integrated in the case
• New cover for the Raspberry Pi M.2 HAT+ add-on board 

NEW: Alternative slim version for the new Raspberry Pi Active Cooler

Required models from Raspberry Pi 4 case, VESA mount, internal fan

• Footer pins >> rpi3-footer - optional
• Fan mount >> rpi4-fanmount - optional (Only needed if you want to cool the Pi with a internal fan (40mm x 40mm x10))

Features

• VESA mount (75mm x 75mm)
• Internal fan mount (40mm x 40mm x10) - optional
• Thread inserts (case and pi mounts)
• Additional slot for camera ribbon cable (Located over the Ethernet port)
• Access hole to on/off button or power switch integrated in the case (V2)

Print instructions

See Raspberry Pi 4 case, VESA mount, internal fan

Raspberry Pi M.2 HAT+ add-on board

Additional components are required to attach the add-on board: 

• 4x M2.5x15+6 Male-Female spacer sleeves → Spacer set
• 4x M2.5x1mm Nylon flat (not necessarily required)

Slot for camera ribbon cable

Break out the cover

Update case for Raspberry Pi 5