Warped a little but that's on me for not fully dialing in ABS, still works awesome and seriously reduces fumes.
Tingkat - Creality K1C HEPA and Carbon Filter Air Scrubber
Tingkat is a slim left-mounted, stackable air scrubber for the Creality K1C, K1 and K1 Max
70
224
3
4691
updated September 19, 2024
Makes
Comments
Works a treat, I did rename my fan to what I wanted in the config file. (edited)
If you have the K1 MAX with LIDAR like I do the LIDAR camera extends over the edge of the build plate. This is usually only at the very beginning when it calibrates the LIDAR, when it does the auto bed leveling. and when it prints the line along the edge of the plate. This design is also too wide for the available space since the LIDAR version has a calibration tag hanging off the bed's side. (see second photo)
This doesn't interfere with the print head? Just because it clears the bed, does the head have the room to make it to the edge as far as it needs?
@Splinervisio_1984165 It has sufficient clearance. So far I didnt encounter any issues. You can skip the hood if you are worried about the print head hitting it.
@nerrag Looks great!
Have you thought about making a version for 5015 fan with vertical placement?