Remixed Nanoleaf DC power/Arduino case w/ easy wiring leaf

Created a new power box w/ cover and remixed the base a bit to remove the bar across the wiring pass through and add bolt holes to secure the box to the leaf. Also added small notches to help center the LED strips in their installation locations.

Bolts together with M3 screws.

Lid is friction fit - stays in place when installed.

Two bases are included. One is for use with the box as mentioned above. The other is for use for all other leafs and I found easier to work with after removing the bar over the hole where your wiring will pass though.

Made to hold this Arduino unit D1 ESP8266 - https://www.ebay.com/itm/D1-Mini-NodeMcu-4M-bytes-Lua-WIFI-Development-Board-ESP8266-by-WeMos/192892550106

DC power jack - https://www.aliexpress.com/item/32997902659.html?spm=a2g0s.9042311.0.0.3a744c4dW4lHVg

DC power adapter ( 5v 3A ) - https://www.aliexpress.com/item/32911055744.html