Stage Lighting Wrench for C-Clamps

Small wrench for adjusting stage lighting C-Clamp bolts on stage lights.
10
41
0
192
updated February 18, 2024

Description

PDF

A small stage lighting wrench for adjusting bolts on lighting clamps & yokes. The goal was to create a simple lighting wrench for adjusting state lights with the ETC C-Clamp at shows.

I wanted to make the wrench shorter than the TSA tool requirement of 7 inches and be small to fit in a Pelican case, so this is 5.16" (131mm) and a little less than ¾" thick (18mm).

Includes the following:

  • 5/16" Square
  • ½" Square
  • ¼" Hex Bit Driver in the Tip
  • ¼" Hex
  • 3/8 Hex
  • ½" Hex
  • 5/8" Hex
  • ¾" Hex

I printed in Polymaker PolyLite PLA Pro with 3mm thick walls, 3mm thick top and bottom, 40% line infill, and 0.2mm layer height. The wrench is surprisingly strong in the PLA Pro and I have no problem adjusting the bolts on a C-Clamp. 

Tags



Model origin

The author marked this model as their own original creation.

License