A case for a JBL GO3 speaker
313
453
9
4377
updated June 25, 2024

Description

PDF

Portal radio case for JBL GO3 speaker

 

This model is made with single material printers in mind

 

The model consists of 8 separate parts, I encourage anyone with multi-material printers to join parts and print them together for easier assembly.

The rack needs to be glued into the front plate of the radio to hold in place.

The dial and antena needs to be glued in place (I used cyanocrylate)

  • The build uses 4 magnets 20mm x 10mm x 3mm mm 
  • Can be printed in PLA
  • Everything except the antenna base and Top cover can be printed without supports 
  • To print the grid without it closing during printing, you need a good first layer or activate elephant foot compensation in the Slicer (PrusaSlicer/ Bambustudio/ Orcaslicer)
  • The rack numbers can be printed in multi material or just paint them

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more