No supports!
This slide was designed to be used with suction cups. I tested it with the suction cups I purchased on Amazon here.
I designed my sailboat model model around this slide, so you can print that and let your kid go to town!
Will also pair well with this modular water toy designed by CaptainC!
The slide is about 220mm x 160mm x 40mm.
There are a couple small supports built into the model that are easily removed after it's printed.
As a result, you may get a warning in your slicer that there are floating regions. You can ignore the warning.
I recommend using brims when printing this as the contact area on the build plate is relatively thin at the extremities.
Happy printing!
Feel free to join my discord for additional support, questions, or suggestions!
The author marked this model as their own original creation.