Spacer for 2 Ikea Lack shelf

Intended for connecting two Ikea Lack shelves with a depth of 26cm. For greater strength, printing is required, as the model is oriented.

Each spacer consists of two parts, the main body and the cap. Half cap is intended for connecting two shelves at a right angle. Full cap is for two shelves placed side by side.

The inner side dimensions are 1,5mm, 3mm and 10mm. Additional strength can be added with a higher infill.

I use it in two places, one application is purely decorative (1,5mm). In the other, one shelf had fallen over time and couldn't be reattached, and also there was a larger gap between the shelves (10mm). I printed the 10mm version with a 10% infill, and everything now connects nicely.