Firefighter set

You'll need for this project:

• Approx. 1m of electrician's flexible tube - 20mm outer diameter [link]
• 2x empty bottle from Lidl Ice Tea (or equivalent with 40mm diameter cap)
• Red spray paint
• Some zip ties
• Some thin rope

How to make:

• Print the fire nozzle gun left and right side, and glue them together
• Print the cap holder and buckle holder
• Use the spray paint on the bottles without label tag to make it red
• After drying, use zip ties to tie two bottles together. Do a four zip tie loops for the rope connection.
• Tie up the thin rope to zip tie loop
• Connect and glue the flexible tube to the fire gun and to the bottle holder
• Connect and glue the bottle holder to bottles. If your distance between bottles does not fit to the holder, tighten the zip ties, to squeeze the bottles together.
• ???
• Profit - Happy kid :)

If you are struggling with the pipe fitting, try to sand it down with some sand paper, and use some force.