Raspberry Pi 5 with Pineberry Pi HatDrive! Bottom Case

A case for a Raspberry Pi 5 and Pineberry Pi HatDrive! Bottom with an additional 30mm fan. The case allows access to all of the standard external ports (USB, LAN, HDMI) and has clearance for most of the internal connections (GPIO, PCIe, etc). A 30mm fan is located on the side of the case with the airflow split by the PCB to provide cooling for the SSD on the Pineberry Pi Hat and the heatsink on the Raspberry Pi. This iteration does not allow access to the power switch or status LEDs but I plan on adding a button and clear stems for the LEDs in the future. Please let me know if you have any suggestions for improvements. I have included the .step models as well as the Fusion 360 files if you would like to remix the model.

My print settings:

• Bambu P1S 0.4mm nozzle
• Bambu PETG
• 0.20mm layer height
• Arachne wall generator
• Auto organic tree supports (build plate only) were used but like aren't required