Fidget - Mechanical Keyboard Keychain

For all your good klick klack needs wherever you go.

Included two .stl files, one is the keychain as pictured, the other is just the box the switches go in, in case you want to use it to make you own that are stand alone or to have as many switches as you desire! Ive only tested with cherry switches, but i imagine it can hold others as well.

The white version pictured also includes some custom low-profile keycaps I designed and printed!

UPDATE 12/9/2023

I have added a few new version to this:

First is just an extender version with 4 (1x4) slots available (per a commentors request)

Second is a riff on the original with some added ribs and textures on the sides

Third is the ULTIMATE version, 2x3 design, to hold six switches, with the additional rib and textures from above. There is still a slot to hold a key ring (on the top left corner of the model), however it is quite large so i personally wouldn't keep it on my keychain like some of the smaller ones. I keep this version in my car for my partner to stim with while i drive and we inevitable get stuck in traffic.

I may follow up with pictures of the newer designs but likely not until after the new year.

Cheers!

-The Graham Reaper

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: Generic PLA White/Grey/Black

Notes:

Supports are required for the interior of the box that holds the switch. If you have the slicer generate supports, it will try to put some by the hole to attach to a keychain, but they are not necessary there, save a little print time and material by blocking supports there. Supports are generally pretty easy to remove.