Trophy Truck V3&4 solid rear axle 1/10 1/9 RC Car

This is the solid rear axle for the Trophy Truck V3&4.
42
234
0
1369
updated October 14, 2024

Description

PDF

You will need six 18x12x4mm bearings, M3x12 screws, M3 nuts and two M4x16 screws and two M4 Nuts. I recommend to use 8mm aluminium hex rod to make the axle, instead of the printed hex rod.

The rims get screwed together by tiny 2x10mm wood screws. The tires used are General Grabber X3 4.65x1.75-1.9

UPDATE 14.10.2024:

reinforced 12T Pinion for easier printing

Tags



Model origin

The author marked this model as their own original creation.

License