Led Strip Mount

The led-strip rail designed for ceiling.

It is for mounting 8mm led-strip

I used the 22.5-degree angle mounts for against a ceiling that has angle ~30 degree 

The V1 version is sliding in the other direction, a V2 

the 45 and 90-degree angle is sliding in the same direction as V2

In The V2 version, first mount the block(s) against the ceiling or wall, then slide the led-strip-holder on.

Print first one mounting block to test if it fits in the led-strip holder.

If it is too big, change the x-y-contour to -0.15mm ~ -0.25mm

In my case ABS fitted exact, with PLA I needed to change the XY Contour to -0.2mm