I created this handle with a knurled pattern to be used as a drawer pull.
Each handle will consist of 5 pieces:
The posts slide into the handle on each end and then the inserts.
I designed it this way to allow the handle to be printed horizontally. I found it to be too long to be printed vertically, it was getting too wobbly and the quality was decreasing as the print got higher.
The posts have a hole for an M3 heat insert (old trusty) so the handle can be mounted with M3 bolts.
I sanded and applied epoxy to my handles and they look great.
Total width = 220mm (give or take a few mm for clearances)
Total diam = 30mm
I included a screenshot of the parameters so you can see all of the dimensions.
For mounting, I've included a photo showing the distance between the mounting holes in the posts. The distance is 167mm.
The author marked this model as their own original creation.