Mein Ziele bei diesem Modell waren:
Da nur Tüten in diese Box kommen, braucht der Boden nicht durchgängig zu sein, das spart Filament und beschleunigt den Druck.
In PrusaSlicer kann dies durch die Einstellungen:
erreicht werden.
Die Box ist trotzdem stabil und erfüllt ihren Zweck voll und ganz.
Die Abmessungen der Box sind (B x H x T): 133 x 80 x 180 mm
Für Backpulver und ähnliche Tütchen: https://www.printables.com/de/model/762310-box-fur-backpulver-etc-box-for-baking-ingredients
----------
This model has been designed with the following in mind:
Because the box is only for bags, it doesn't need a massiv bottom. This will use less filament and speed up the print.
You can do that in PrusaSlicer with the following configuration:
The box is still pretty stable and does what it should do.
The dimensions of the box are (W x H x D): 133 x 80 x 180 mm
If you need something for baking powder and similar things: https://www.printables.com/de/model/762310-box-fur-backpulver-etc-box-for-baking-ingredients
The author marked this model as their own original creation.