Yet Another Print Bed Scraper

I couldn't find a design of a scraper with a replaceable blade that I liked. So here's another one, internet!

This scraper design uses pause print to embed nuts! Watch this video from Prusa if you're unfamiliar with this feature. The attached 3mf files have this pause enabled at the proper layer.
 

This scraper comes in 3 parts:

• Handle - is designed to have three 6-32 nuts (sorry metric world) embedded during the print! 
• Clamp - 2 Versions:
  • Countersink holes accepts three 6-32 screws approximately 0.3" (7.6 mm) long. If the screws are even 1 mm too long, they will poke out of the base. Sorry for the odd screw size, I tried to make this scraper as thin as practical.
  • Straight holes for button head screws (same screw size as above)
• Blade - replaceable, 0.85 mm thick, 30 deg scraping angle, both edges are functional.