Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure For Prusa Bear - Remix

This is a remix of my favorite Einsy + Raspberry Pi Case for the Prusa Bear Upgrade

This is still WiP, I have not tested it myself, but everything lines up in CAD and the changes are very minor. I will remove this warning once I test it.

Only the enclosure needed to be updated so it can be screw into the V-Slot with some t-nuts. Everything else is assembled the same way as the original from KalleKnall.

Needed hardware:

• 4 X M3 T-Nut
• 4 X M3 X 10 mm (Countersunk)

Todo:

• Make full hexagon pattern on side of case
• Test when Bear Upgrade is finished