The Poly Wallet - extras

The Poly-Wallet is a slick plastic wallet for your plastic. Holds 6 credit cards, or 4-5 credit cards and 1 key card. Buying these extras helps to support me. The wallet is FREE: https://www.printables.com/model/758318-the-poly-wallet-slim-pop-up-wallet 

Prototyped with a 0.4mm nozzle, 0.2mm layer height. 

Note: The split cascade lever has been prototyped and tested. I have not tested the finger loop yet. The images do not show the most up-to-date version, but are close.  I'm working on extras, including:

• Split cascade lever
• Finger loop base
• No-lock cover
• Slimmer version (pending)
• Others (if it proves popular) …

PRINTER SETTINGS

Adhesion

• All parts: Your normal settings. 
• Note: If you experience elephant's foot, particularly for the lever, I recommend using a raft - or adjust other printer settings. It's very important that there is no elephant's foot on the lever.

Infill

• Finger Loop Base: Recommend 100%
• Split Cascade Lever: Recommend 100%
• No Lock Cover: Doesn't matter

Supports

• Finger Loop Base: Yes
• Split Cascade Lever: Yes
• No Lock Cover: Yes

For assembly and operation instructions, please see the free wallet’s page.
https://www.printables.com/model/758318-the-poly-wallet-slim-pop-up-wallet