Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Control3d Black
PLA Prusament Lipstick Red
PLA PolyTerra Sunrise Orange
PLA ESUN PLA+ Beige
PLA Control3d White
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Lipstick Red
At layer #12 (1.04mm) swap to Sunrise Orange
At layer #15 (1.28mm) swap to Beige
At layer #20 (1.68mm) swap to White for the rest.
The author marked this model as their own original creation.