Simple RP SMA Antenna Mount Helium Miner

Designed this to mount an RP SMA helium hotspot miner Antenna outside. Suggest uv resistive printing materials such as ASA. Covered mine with epoxy at the corners to support the antenna more. Stuck a command strip to the back and one on the outside of my place and it has been working well so far. No support needed, print with the hole on the bed, I printed with a .6 nozzle for speed and strength but print what you want. Use an RP SMA extension cable such as:

https://www.amazon.com/dp/B08NCRV25K?psc=1&ref=ppx\_yo2\_dt\_b\_product\_details

just pinch the mount between the extension cable and the antenna and thread through. If the hole is too small just use some scissors to carve it slightly larger, shouldn't need too much adjusting.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

No

Supports:

No

.2

Infill:

15%