Hueforge
12
44
0
291
updated February 9, 2024

Description

PDF

Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.8
PLA+ esun grey Transmission Distance: 5
PLA+ esun silver Transmission Distance: 5
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to grey
At layer #7 (0.64mm) swap to silver
At layer #11 (0.96mm) swap to White for the rest.
 


 

Model origin

The author marked this model as their own original creation.

License