PSG hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Wanhao noir Transmission Distance: 5
PLA Wanhao Bleu Transmission Distance: 5
PLA Wanhao Rouge Transmission Distance: 5
PLA Wanhao Orange Transmission Distance: 5
PLA Wanhao Blanc Transmission Distance: 5

Swap Instructions:
Start with noir
At layer #4 (0.4mm) swap to Bleu
At layer #8 (0.72mm) swap to Rouge
At layer #14 (1.2mm) swap to Orange
At layer #17 (1.44mm) swap to Blanc for the rest.