Drawer Organizer Spacer Bracket

Drawer Organizer Spacer Bracket - Stop The Slide!

Keeps your organizer from sliding all over the place when you close the drawer.

Features

• Easy to use - No tools or glue required
• Slides into place quickly
• Can accommodate a wide variety of gaps
• Allows for adding items on top of the bracket to maximize storage space
• Two can be used to prevent up/down movement or side to side.

Easy to print

Overview & Setup

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

15

Filament:

Overatre PLA White 
 

Notes: 

Printing Tips

* There is a photo of the items unassembled on the print bed for your convenience.

• Print the slider standing on it's flat edge
• Print the rail flat

Print 4 of the plugs

Assembly

There is a video showing usage and assembly.

1) Size the spacing you want to use by eyeballing it
2) Put the plugs into the lower rail - Press firmly untill it's full seated. The underside should be level with the drawer
3) Put the slider on top with the holes facing away from the rail riser and towards the organizer. The weight of the organizer will help hold everything together. The Pegs are tight but this will add some additional strength. It should just rest right on top of it.
4) Push the top slider over the pegs and press firmly until it's all together.
5) Slide it in there.

OVERVIEW

Category: Organization