{"data":{"model":{"id":"757354","slug":"todds-filament-clip","name":"Todd's Filament Clip","authorship":"remix","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"4.0000000000","myRating":null,"ratingCount":2,"description":"

I've tried quite a few filament clips, but fundamentally don't like the key concepts most of them use. They either clip onto the edge of a roll or you are expected to snap it onto two strands of filament and hope they don't both start unravelling together. I thought, why can't we just use friction on the side so I went looking for an existing one. The remix here is the only one I found, and while it did work as I was expecting, there were a few things I wanted to change.

The filament can be hard to grab onto when it's wedged right up against the side of the roll.
I found it slightly harder to slide under other strands horizontally due to the size.

As such, I went out to create my own version. It's easy to use \u2026 you simply snap it onto the end of your 1.75mm filament and then wedge it into place by either sliding it down the side of the filament roll vertically or sliding it under the last 4-5 strands of filament horizontally. Friction should take care of holding it in place. Because of the offset, the filament is always about 10mm in the air so it's easy to grab to reposition or to unhook it.

Printing:

Each clip uses about 0.5g of filament.
Print each clip on it's side so it is stronger.
- There is a version with tabs that can be printed without a brim. The tabs help hold things in place and can be easily removed after.
- If you prefer, there's also a version without tabs.
PrusaSlicer settings I use for a 0.4mm nozzle (included in the .3mf):
- 0.2mm SPEED print settings (anything should work fine)
- default top (5)/bottom (4) layers
- 1 perimeter
- 0% infill. The empty inside helps it to \u201csnap\u201d onto the filament easier.
- \u201cConcentric\u201d top/bottom fill patterns
- \u201cRear\u201d seam position (just so it doesn't put a seam inside where the filament clips)
- \u201cClassic\u201d perimeter generator (NOT Arachne)
PrusaSlicer settings I use for a 0.25mm nozzle (included in the .3mf):
- 0.15mm SPEED print settings (anything should work fine)
- default top (6)/bottom (7) layers
- 2 perimeters
- 0% infill. The empty inside helps it to \u201csnap\u201d onto the filament easier.
- \u201cConcentric\u201d top/bottom fill patterns
- \u201cRear\u201d seam position (just so it doesn't put a seam inside where the filament clips)
- \u201cClassic\u201d perimeter generator (NOT Arachne)
Note on Arachne: due to the point converging to a single line width, Arachne ends up generating a point where it converts from two lines to one and creates a crease that is extremely weak and much of the end of the clip will break off.

Updated Feb 24, 2024:

I've done a lot more testing and simplified things to a single version for each nozzle size. They're nearly identical but are optimized for the specific nozzle sizes. The 0.25mm one gets thinner to slide a little easier between filament or down the sides.

I've also now included versions with print tabs attached. These allow them to be printed without a brim and then you can just rip the tabs off after the print is done. The attachment point is about 0.5mm wide so they pull off very easily.

Updated March 16, 2024:

After using my clip for a while, one thing that started to bug me was how I couldn't easily pull the filament off the clip while it was still tucked into the roll. So I decided I wanted a version where the filament clips directly onto the end so after I mount my roll to use, I can just pull on the filament to unclip it and leave the clip tucked into the side of the roll. I took the opportunity to also have less of a sharp angle to help keep it from bending. In the new V2 version, both models are identical from the clip to the bend. The 0.25mm version just gets thinner at the tip to let it slide in the gaps better.

Support

If you like my models and want to make my day, you can buy me a \u2615!

","category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","description":"Upgrading and improving your 3D printer couldn't be easier - no matter whether you're looking for functional or aesthetic modifications. Discover the best improvements.","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","description":"Add cool improvements to your 3D printer - drybox, MMU2S filament buffer, or extruder visualizer. These smart ideas will make your printer even better!","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-05-26T00:11:29.271857+00:00","firstPublish":"2024-02-09T07:44:52.376624+00:00","datePublished":"2024-05-26T00:11:29.239238+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"New V2 version! Another filament clip that's easy to clip on and off inside the roll.","likesCount":6,"makesCount":2,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":27,"displayCount":276,"filesCount":6,"privateCollectionsCount":3,"publicCollectionsCount":4,"pdfFilePath":"media/prints/757354/pdfs/757354-todds-filament-clip-1d83fb92-b4d7-4b24-af46-3e2970e860c1.pdf","commentCount":3,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"2914565","filePath":"media/prints/757354/images/6250673_e71c6860-9fae-4315-8945-1e2f2adc03b3_32b33036-add1-464c-9136-826b12e1656f/img_2502.jpeg","rotation":0,"imageHash":"1ygGDYaqsZd/a4Z6VYN4Z2/N9Ot8","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"images":[{"id":"2914565","filePath":"media/prints/757354/images/6250673_e71c6860-9fae-4315-8945-1e2f2adc03b3_32b33036-add1-464c-9136-826b12e1656f/img_2502.jpeg","rotation":0,"imageHash":"1ygGDYaqsZd/a4Z6VYN4Z2/N9Ot8","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},{"id":"2914566","filePath":"media/prints/757354/images/6250674_3f3e59a0-39d4-487d-8500-a656785f8c02_6db4ce08-a715-405f-90ee-7e62c9a43b82/img_2500.jpeg","rotation":0,"imageHash":"mQgGDYL42ZfcWmZGZIZldF/D9t6p","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},{"id":"2914567","filePath":"media/prints/757354/images/6250675_749d76ae-1d6e-4c7f-8147-5ed4a7349edf_b4ea01c3-653a-4c53-964e-32ab6db9ad86/img_2501.jpeg","rotation":0,"imageHash":"mAgGDYT06bnse3VXV6VGd93UoK+K","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},{"id":"2914525","filePath":"media/prints/757354/images/6250596_00b9f073-2513-4e94-867c-b3ade70d937a_2d9cbe48-469f-4666-9165-6133997a9750/img_2493.jpeg","rotation":0,"imageHash":"XykKFYK1h4eAd4h8d3iId85334z3","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},{"id":"2773242","filePath":"media/prints/757354/images/5941506_a04c7b51-3334-4e08-a141-2d1214427f8f_ed2946c8-1259-4403-8429-4d5f6d36b317/img_2356.jpeg","rotation":0,"imageHash":"VvoKNRZoeG6J+YWod2QmV1mAlwV4","imageWidth":3024,"imageHeight":4032,"__typename":"PrintImageType"},{"id":"2773241","filePath":"media/prints/757354/images/5941504_7a13294c-1e5d-4692-a791-e25f693c7ef9_1a9aad93-53c4-4371-b836-1ea8c9e21e95/img_2358.jpeg","rotation":0,"imageHash":"1tkKTSKGeXyY93eoaZVGZ3iAiAeI","imageWidth":3024,"imageHeight":4032,"__typename":"PrintImageType"},{"id":"2773243","filePath":"media/prints/757354/images/5941505_c0bf6b8c-e492-490b-a2ae-28300778e674_fbe1d66f-6661-496e-be9b-3ca88ca8a44c/img_2357.jpeg","rotation":0,"imageHash":"E/oGJQ50VW6P6pPZd4umqRqwowA7","imageWidth":3024,"imageHeight":4032,"__typename":"PrintImageType"}],"tags":[{"name":"filament","id":"303","__typename":"TagType"},{"name":"clip","id":"339","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"3430089","filePreviewPath":"media/prints/757354/previews/da6121e19c3ff6002e8c73ac1d3fc2648e6ae345.png","__typename":"STLType"},"license":{"id":"1","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[{"id":"448939","modelId":"275147","modelName":"Yet Another Filament Clip - The DM Clip","modelAuthor":{"id":"40980","handle":"MadMax","verified":false,"publicUsername":"MadMax","__typename":"UserType"},"model":{"id":"275147","name":"Yet Another Filament Clip - The DM Clip","slug":"yet-another-filament-clip-the-dm-clip","datePublished":"2022-09-24T00:02:36.457191+00:00","image":{"id":"1199630","filePath":"media/prints/275147/images/2444779_ff8144aa-a711-4916-a05b-536aedfd082f/4.jpg","rotation":0,"imageHash":"ZfcJJIT3aGd8k4aHZmf4bZnPpg==","imageWidth":1689,"imageHeight":950,"__typename":"PrintImageType"},"club":false,"authorship":"author","license":{"id":"1","name":"Creative Commons \u2014 Attribution","disallowRemixing":false,"__typename":"LicenseType"},"eduProject":null,"__typename":"PrintType"},"url":null,"urlAuthor":null,"urlImage":null,"urlTitle":null,"urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"}],"remixDescription":"

This is a bit smaller and holds the filament away from the side so it is easier to grab onto. Simply snap it onto the end of the filament and slip it down the side or a few strands of filament.

Support

If you like my models and want to help support me, you can donate to my ko-fi.

https://ko-fi.com/toddstansell

","__typename":"PrintType","user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"825942","name":"Rivian Cup Holders","slug":"rivian-cup-holders","ratingAvg":"5.0000000000","likesCount":102,"liked":null,"datePublished":"2025-03-12T17:27:21.913048+00:00","dateFeatured":null,"firstPublish":"2024-03-30T17:42:35.097822+00:00","downloadCount":558,"mmu":false,"category":{"id":"89","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"89","name":"Automotive","nameEn":"Automotive","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-12T17:27:21.951881+00:00","image":{"id":"3033823","filePath":"media/prints/825942/images/6511755_23d02a43-3faf-433f-aecf-e0ea81c18b30_8b3c69e5-b84c-4859-acf0-ec426a7931c1/img_2667.jpeg","rotation":0,"imageHash":"G/gFBYBHRwl5g4qAdzqXgEePhFv4","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"798640","name":"Wyrmspan Resources","slug":"wyrmspan-resources","ratingAvg":"5.0000000000","likesCount":83,"liked":null,"datePublished":"2024-06-02T17:36:12.570028+00:00","dateFeatured":null,"firstPublish":"2024-03-09T18:01:07.933749+00:00","downloadCount":612,"mmu":false,"category":{"id":"31","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"31","name":"Board Games","nameEn":"Board Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-06-02T17:36:12.611604+00:00","image":{"id":"2885476","filePath":"media/prints/798640/images/6184006_2e94171f-4365-4e25-bb84-2fefaf4e5d5f_07c085e7-c305-4765-a4b4-8bd657a6e3b3/img_2441.jpeg","rotation":0,"imageHash":"4CgODYJweIiIh3d4h2eHhn+i+yp4","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"1097273","name":"Rivian Customizable Console Organizer","slug":"rivian-customizable-console-organizer","ratingAvg":"5.0000000000","likesCount":73,"liked":null,"datePublished":"2025-03-11T21:49:07.948609+00:00","dateFeatured":null,"firstPublish":"2024-12-04T19:04:01.481002+00:00","downloadCount":417,"mmu":false,"category":{"id":"89","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"89","name":"Automotive","nameEn":"Automotive","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-11T21:49:07.976270+00:00","image":{"id":"3826729","filePath":"media/prints/1097273/images/8295318_14e27ccf-1a67-4f2c-ac86-bef3badbe850_31d94687-24da-468b-b4c7-84ecfacc78b2/img_3377.jpeg","rotation":0,"imageHash":"ovgNDYKPeFiIiIedZVeZhioAtgym","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"801845","name":"Wyrmspan Weighted Coins","slug":"wyrmspan-weighted-coins","ratingAvg":"5.0000000000","likesCount":53,"liked":null,"datePublished":"2024-08-22T19:27:12.008571+00:00","dateFeatured":null,"firstPublish":"2024-03-14T05:51:42.191014+00:00","downloadCount":524,"mmu":false,"category":{"id":"31","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"31","name":"Board Games","nameEn":"Board Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-08-22T19:27:12.032028+00:00","image":{"id":"2908915","filePath":"media/prints/801845/images/6238850_a79016c2-d183-4401-8f74-887386fcdbd3_516117cd-7e00-4d1f-822a-0bbf22ae87fc/img_2490.jpeg","rotation":0,"imageHash":"nggKFYKQZ5dsiIeWh5iHdu+n/X7J","imageWidth":2100,"imageHeight":1576,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"761896","name":"Rivian Sunglasses (vent hook + NEW visor clip)","slug":"rivian-sunglasses-vent-hook-new-visor-clip","ratingAvg":"5.0000000000","likesCount":32,"liked":null,"datePublished":"2025-03-11T21:53:51.208967+00:00","dateFeatured":null,"firstPublish":"2024-02-12T04:21:13.837190+00:00","downloadCount":294,"mmu":false,"category":{"id":"89","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"89","name":"Automotive","nameEn":"Automotive","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-11T21:53:51.230925+00:00","image":{"id":"2988837","filePath":"media/prints/761896/images/6409629_2a205113-ffa4-41ea-b8d5-b5f8a2f9f4a3_8bcdf15f-99d3-49af-93df-515c3bc71b9a/img_2570.jpeg","rotation":0,"imageHash":"YCkKFYTAmYeId3eYZseIc7t2v2v3","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"844330","name":"Wyrmspan Card Display","slug":"wyrmspan-card-display","ratingAvg":"4.5000000000","likesCount":26,"liked":null,"datePublished":"2024-08-23T05:53:22.876992+00:00","dateFeatured":null,"firstPublish":"2024-04-15T01:39:43.193272+00:00","downloadCount":137,"mmu":false,"category":{"id":"31","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"31","name":"Board Games","nameEn":"Board Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-08-23T05:53:22.895323+00:00","image":{"id":"3473811","filePath":"media/prints/844330/images/7493835_816af4e0-8595-48dc-9452-0b653ac7c738_94a40ea9-6c63-4347-b36a-185904e5ad8b/img_3116.jpeg","rotation":0,"imageHash":"HykGDYIEiXiMl4mReYiIeNeZr2/o","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"900651","name":"Wyrmspan Stackable Trays","slug":"wyrmspan-stackable-trays","ratingAvg":"0E-10","likesCount":25,"liked":null,"datePublished":"2024-06-24T21:42:40.521844+00:00","dateFeatured":null,"firstPublish":"2024-06-04T00:42:35.604710+00:00","downloadCount":66,"mmu":false,"category":{"id":"31","path":[{"id":"30","name":"Toys & Games","nameEn":"Toys & Games","__typename":"CategoryType"},{"id":"31","name":"Board Games","nameEn":"Board Games","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-06-24T21:42:40.547578+00:00","image":{"id":"3205908","filePath":"media/prints/900651/images/6895283_dd6e6086-8b72-46ec-9a39-3298de8059d2_a85836c5-272a-4074-a41f-0f660b3a2246/img_2893.jpeg","rotation":0,"imageHash":"G+gJDYQ6N4iKdIhWl/d4lk8ywVQG","imageWidth":4032,"imageHeight":3024,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"759646","name":"Rivian Air Vent Hook","slug":"rivian-air-vent-hook","ratingAvg":"0E-10","likesCount":23,"liked":null,"datePublished":"2025-03-11T21:54:00.855132+00:00","dateFeatured":null,"firstPublish":"2024-02-10T20:03:46.918311+00:00","downloadCount":195,"mmu":false,"category":{"id":"89","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"89","name":"Automotive","nameEn":"Automotive","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2025-03-11T21:54:00.899005+00:00","image":{"id":"2775201","filePath":"media/prints/759646/images/5945981_bca897bc-974f-4e61-b749-fd3a42b45a85_544a34e0-ed8c-413c-b06e-a92cca17a958/img_2362.jpeg","rotation":0,"imageHash":"DwgKBQAMpGOIB7Ooi4x3hj1QtAZF","imageWidth":3024,"imageHeight":4032,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"1659848","handle":"ToddStansell","verified":false,"dateVerified":null,"publicUsername":"Todd Stansell","avatarFilePath":"media/auth/avatars/a7/a7d78eb2-bdab-4426-a82b-20062747b907.jpg","badgesProfileLevel":{"profileLevel":16,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null}}}