Ender 3 S1 Camera Mounting Bracket using LCD Screen Mounting Holes

Ender 3 S1 camera mounting bracket using the existing holes of the original control screen.
4
42
0
283
updated February 8, 2024

Description

PDF

Ender 3 S1 camera mounting bracket using the existing holes of the original control screen. (I have removed the screen since I am using a Sonic Pad.) I prefer to come off the side with my camera as opposed to the front.

I have placed a 4.5mm clearance hole at top for a M3 screw. You can use, or make, your own mount. Personally, I am using the MID variation bracket with a Logitech C920, using the standard ΒΌ-20 mounting hole, and the mounting bracket by Mustangconv85 (https://www.printables.com/model/425274-webcam-mount-for-14-20).

There are three variations, all having a little fun with curves and circles, placing the distance and height at various points above the frame of the printer (dimensions are below) depending on how you want to line up your camera with the bed. The photo illustrates the camera shot with the MID bracket.

Using the circles and wire ties will allow you to hide the cable nicely.

No supports required if printed as shown in the photo.

 

 

Tags



Model origin

The author marked this model as their own original creation.

License