teapot handle upgrade

An upgrade for my teapod to get rid of the rusty screw.
4
8
0
70
updated February 8, 2024

Description

PDF

An upgrade for my teapod to get rid of the rusty screw.

Also you don't have to rely on the material to hold up to the forces, you now have a screw and nut connection.

I used the phillips screws because they have a nice big head to not slip through the hole in the handle.

The lenght can be 18mm instead 20mm, but don't get anxious, the screw tip does not touch the glass, it will not break. I know, this looks like it does.

I recommend printing in PETG and with support for the nut hole. 0.2mm layer height is absolutely fine.

Tags



Model origin

The author marked this model as their own original creation.

License