Upside Down Paintbrush Holder

Work in progress….  Feel free to remix etc to make it work for you.

I wanted a paintbrush holder to hold my brushes tip down.  This is what I've come up with so far.

The base:

PLA or PETG - PETG will do better for water tightness but YMMV

Designed to be printed with 5 walls and 4 or more top/bottom layers using a 0.4mm nozzle @ 15% gyroid infill.

The top:

TPU 95a

I printed it with 3 walls and 15% gyroid infill.  It's not stiff enough for me.  I will be reprinting with 5 walls and 25% infill next.  If that doesn't make it feel better, then I may thicken the top a bit.  Test and see what works for you.

This works with the 2 sets of paintbrushes that I have but as always YMMV.

STEP files included