Threading Tool Handle
A handy tool for cut and recut threads.
It should fit square shaft from M2-M10 thread cutter (most inch thread as well).
The square shank holders are graduated 0.5mm in one single tool.
Insert 2,5-4,5mm square shaft in one side and 5-7mm in the other side.
The knurled handle is enough to cut threads into printed parts and also recut metal.
If you need more grip you can insert 8mm Screws into the side holes as a lever.
Easy printable, without Support or Brim!
Use 4 walls and tough infill. PLA is good enough!
Happy Printing😃 and don't forget to leave a like👍 and subscribe✔. It's free😉
The author marked this model as their own original creation.