RCBS 10-10 Scale Replacement dust cover

Got a nice RCBS 10-10 Scale but it was missing the dust cover. This is my attempt at creating a new one. 

To make it all rounded like the original, you either need a LOT of supports or it looks horrible like this one:

Added a bevel to the top corner that does not interfere with the packed up scale. 

I've included both files for anyone who likes removing supports. When printing on the beveled edge I did need to use a brim and slow the printing speed down to about 50mm/s. It's about 255mm wide so should fit diagonally on most small printers.