1" Fibonacci128 - Snap Diffuser Cover

This model is a 3D printed diffuser / cover that snaps on to a 1" Fibonacci128.  Print a diffuser / cover in whatever material and color you want!

I recommend Atomic Filament Translucent Smoke Black PETG Pro (used in all photos): https://amzn.to/48r1Zof

A collaboration with GeekMomProjects who came up with the original snap model design for Lux Lavalier. We collaborated and iterated on different model geometry, infill, print settings, etc.  I've published a smaller version here with her express permission.

I can't wait to see what variations you come up with, remix, and share!  With attribution, of course. 😁

See the beginning of a thread of videos, photos, discussion, etc on Mastodon here: https://mastodon.social/@geekmomprojects/111645508733187377

Unlike the black LED acrylic diffuser included with the 1" Fibonacci128 , this one doesn't require any screws, but also doesn't include a rear cover.

1" Fibonacci128 is a tiny, beautiful 25.4mm circular disc with 128 1mm WS2812B RGB LEDs surface mounted in a Fibonacci distribution.

More info: https://www.tindie.com/products/31672

Recommended print settings:

• Material: Atomic Filament Translucent Smoke Black PETG Pro or other transparent/translucent/smoke PETG filaments
• 0.15mm Quality PruaSlicer Preset
• Layers and perimeters
  • Vertical shells
    • Perimeters: 100
• Infill
  • Fill density: 100%
  • Fill pattern: Concentric
  • Top fill pattern: Concentric
  • Bottom fill pattern: Concentric