mecha simpit pannels

just a housing for switches and things to be used when building a sim rig for mecha/aircraft.
14
32
0
569
updated February 6, 2024

Description

PDF

just a housing for switches and things to be used when building a sim rig for mecha/aircraft.

starter code here: https://github.com/Amyharrison93/stream-deck

i used a Leonardo for the first controller i would recommend using one per block to make them easier to configure and reconfigure. I will be updating the code as i go with my own version of this but right now its only good for 12 buttons and 4 sliders.

Update: I changed the throttle bay to fit the throttle better and also account for the wires. expanded the bottom holes on the face plate to fit some bigger switches. got rid of some of the holes so that the encoders fit more reliably and are accessible and added space for a screen 1602A

update: added some more faceplates and a specific mechwarriour one for the throttle side

update: added a better housing for the electronics and also added a blank faceplate in case you want to add your own buttons and holes and things

Category: 3D Printing

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License