This is a holder for Festool Guiderails.The model makes it easier for you to store your Festool Guiderails.You screw the model into the wall and then you just slot the Guiderail into it and close it.You can change to tight Guiderail sits in the holder, by loosening or tightening the screw that holds the knob in place.
For the short Guiderails it's reccommended that you use two holders, for the longer ones it's reccommended that you use three to help suppert the other two.The screws used for attaching the green knob is a 5x20mm bolt screw and a 5mm lock nut.I reccommend that you print the base in PETG and you can print the knob in whatever plastic you would like. I printed it in green PLA so it matches the colour of Festool.
The author marked this model as their own original creation.