It has a width of 2.95 millimeters, so it can fit into my 3mm stand. I recommend slowing down your printer's speed to around 100mm/s to avoid stringing and to get an all around nicer look.
A 0.4 mm nozzle will work on 0.2 layer height, but for best results use a 0.2 mm nozzle and 0.1 mm layer height.
Brims are highly recommended for bed adhesion.
If you want it to be larger at all, only adjust the XY size so it keeps the same thickness. Use the provided 2.95mm gauge to verify your tolerances on the stand before printing the Benchy if you plan to mount it that way. If the tolerances are too loose or tight, then adjust the Z height of this model.
If you aren't, then do whatever size in all dimensions you want!
Designed specially so that everything is one solid piece.
If you think it looks good, post a make and give it a review and a like !😊
Made with ❤ from Canada
The author marked this model as their own original creation.