Hold Down Clamp for Atomstack Laser Cutter / Engraver Honeycomb Bed

Clamp for holding down materials on an Atomstack laser cutter honeycomb bed.
48
481
2
1311
updated February 4, 2024

Description

PDF

A clamp for holding down wood or other material on the honeycomb bed for an Atomstack laser cutter. It may work on other beds but it was specifically designed for the Atomstack bed and fits very snugly. You can scale it down slightly if you find it too tight. 

There are two different versions available, 16mm for thinner materials and 32mm for thicker ones. If you need another height, let me know and I can upload one.

The arms are only 1.3mm thick so they should clear under the laser under most circumstances.

Tags



Model origin

The author marked this model as their own original creation.

License