Soldering helping hands tool, clip on aid.

Soldering third hand helper tool, clip on aid for now, only a few XT connectors.

Clips on to some existing solder helper tools. Step files are attached to modify if different.

Print the XT60E1-M up right with organic supports.

I made it a looser fit to enable tidy up to be quicker.

I don't recommend the spacers to be printed but rather a piece of round bar to be cut and then inserted into the back of the alligator clip. The stl is the correct size to use.

If the teeth do not align with the clip - loosen the alligator clip lock and adjust.

Approx 3 hrs printing slowly.

On the rcwl-0516 holder - break off the two tabs next to the dovetail.

Petg printed at ambient temp of 25 deg, 58% humidity.