Satechi hub stand for Amazon Basics monitor stand

This is a Satechi stand designed to support the Amazon Basics monitor stand for a more compact installation.

https://www.amazon.com/AmazonBasics-Premium-Single-Monitor-Stand/dp/B00MIBN16O?th=1

https://www.amazon.com/Satechi-Aluminum-Type-C-Clamp-Reader/dp/B078853NCS/ref=sr_1_1_sspa?keywords=Aluminum%2BType-C%2BClamp%2BHub%2BPro%2Bsatechi&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

The Satechi hub works on Windows.

Two pieces make up this assembly and can be printed separately. Add only supports on the front part of the hub.

I printed the hub with a 15% gyroid infill, and I was able to tighten the monitor stand normally.

/!\ The maximum desktop thickness is 35mm.

For this project, you'll need 

• 2 M3x6 screws 
• 2 M3 insert (CNC Kitchen)

 I'm not sure if other inserts will work, as I only use these. 

/!\ The space between the bottom of the inserts and the wall is narrow, so be careful when using a soldering iron to avoid the tip protruding during insert assembly.

Feel free to let me know if any modifications are needed or if you require files compatible with different types of inserts or nuts.