Lack Enclosure LED Channel Mount

I was looking for a quick way to add lighting to an IKEA Lack enclosure that wasn't mounted on the lid. This bracket was designed around 17mm wide aluminum channel I found at the hardware store but should work with other sizes as well. They mount the front leg and aim the light 45° inward towards the printer. 

You'll need two #4 x 3/8" or longer screws for each bracket, I used two brackets per light. The hole to attach the channel clip is 2mm in diameter and is 11mm deep for the screws that came with my kit, you may have to modify that to fit your needs.