Tool to replace filter of Drufi DFR

To replace the filter of my water filter Drufi DFR, I have designed my own tool and did not buy the original tool.
3
18
0
245
updated February 10, 2024

Description

PDF

To use the printed tool, I recommend a pipe or a shaft with a diameter of 16mm out of stainless steel or any other metal material.

Part list:

  • printed ring | quantity: 1
  • printed fixing plate | quantity: 2
  • pipe or rod ⌀16mm | length: ≥200mm
  • cylinder head screws M4x25 | quantity: 4
  • hexagon nuts M4 | quantity: 4
Print instruction:
  • material: ASA or PETG 
  • supports: can be printed without support
  • layer height: 0,2mm or 0,3mm
  • nozzle diameter: 0,4mm or 0,6mm
  • brim: not required
  • enclosure: recommended
Assembly instruction:
  1. deburr parts if needed
  2. add hexagon nuts M4 (3x) to fixing plates
  3. insert pipe to ring
  4. assemble fixing plates by using cylinder screws M4x25 (4x)

Tags



Model origin

The author marked this model as their own original creation.

License