3x3 Rubik's Cube

Simple but reliable 3d printed Rubik's 3x3 Style Cube.

----------------------------------------------------------------------------------------------------------------

You Will Need:

6 - M3x12mm Screws

6- M3 Slim Washers (Optional)

----------------------------------------------------------------------------------------------------------------

Hi, The idea behind this project was to design a 3x3 cube that works well enough

Keep in mind that the tension of the screws affects the stiffness of the cube.

Some Post-Processing (Filing Some Edges) May Be Needed.

For the stickers, I recommend using rubik's cube stickers, or we could manage by printing little squares of different colors and then sticking them on the faces of the cube. If you have a printer with MMU, you could directly print the sides with their respective colors.

I will recommend using supports in the center, edges and on the sides since they have floating bridges. Altough I Ronded off strong angles to make it easier to print without supports.

Hopefully someone will print it out and give me some feedback. :D

Thanks to Andruskj for Providing Feedback

----------------------------------------------------------------------------------------------------------------

This Project is to participate in: PrusaPrinters 3D Contest: Tabletop Games and Puzzles.